Showing 41 - 60 of 102 , query time: 0.01s
Cover Image
Format:
Image
View from the surface tram looking down toward Belden.
Cover Image
Format:
Image
Service tram going from upper level, Gilman, to Belden in Eagle River Canyon. Cribbings visible, holding hillside in place. Train tracks in foreground. [Title supplied from catalog prepared by the Eagle County Historical Society.]
Cover Image
Format:
Image
Looking up the tram at Belden toward Gilman; railroad siding in foreground.
Cover Image
Format:
Image
Close up looking up the tram at Belden toward Gilman; supports at midfield.
Cover Image
45) Belden
Format:
Image
Looking down the Eagle River toward Belden. Railroad tracks in foreground; Gilman buildings are visible at the top.
Cover Image
46) Belden
Format:
Image
New Jersey Zinc Co. mill and mining facility in Belden (Eagle River Canyon), August 1998. Both the mine and the railroad were out of operation by then. The surface tram is visible going up the incline of the cliff at right midground.
Cover Image
Format:
Image
Looking across the railroad tracks at Belden, the tram house is white, midground; the surface tram cable is running up the cliff on the right. Cribbing visible at center.
Cover Image
48) Belden
Format:
Image
Facilities at Belden, some abandoned. Gilman is visible at the top of the cliff. Mine buildings are at right, midfield.
Cover Image
Format:
Image
Documenting the landslide onto the D&RG tracks in Eagle River Canyon. The numbers on the photo correspond to the descriptions below. The old mill is at far right. Verso: "1. New House Station on tram; 2. Eagle River; 3. Slide on D&RG; 4. An old mill, note the cribbing underneath the building" [written by Tom Knight]
Cover Image
Format:
Image
More steel milling machiner in the repair shop. The lathe at center is approximately 20 feet long.
Cover Image
Format:
Image
Documenting the landslide onto the D&RG tracks in Eagle River Canyon. The numbers on the photo correspond to the descriptions below. Verso: "1. Compressor house; 2. Tram landing; 3. New House tunnel station on tram; I am working on a level with the New House Tunnel, but about ½ miles in the Mtn. Notice how steep the tram is; it's steeper yet before it reaches Gilman." [written by Tom Knight]
Cover Image
Format:
Image
The dryer building for zinc is at the far right. The zinc slurry would be heated and dried, leaving a very fine zinc powder. The powder was shipped in sealed box cars as it was so fine it would blow away in an open car. The rail line for shipping runs through the Eagle River Canyon (Belden area) so the final products for shipping were finished at this level.
Cover Image
Format:
Image
Approaching Belden at the end of the surface tram. Mine facilities and equipment are visible as are the Eagle River and the railroad tracks across the river.
Cover Image
Format:
Image
Ramond M. "Hap" Fletcher plowing snow after a slide at Belden in the winter. Fletcher was a heavy equipment operator for the New Jersey Zinc Co. The vehicle was tracked for better performance in the heavy snow in the Eagle Canyon near Belden.
Cover Image
Format:
Image
An ore car at right, going out to the main pit (Grizzly). Once it arrives at the pit, the rocker wheel on the cart is elevated by the track and dumps the contents of the cart into the pit.
Cover Image
Format:
Image
"All horizontal or subhorizontal development openings made in a mine have the generic name of drift. These are simply tunnels made in the rock, with a size and shape depending on their use—for example, haulage, ventilation, or exploration." -- Encyclopedia Brittannica This drift is at the 16 level in the Gilman mine and has been abandoned. Water dripping through the ceiling carries minerals, forming stalagtites and stalagmites.
Cover Image
Format:
Image
Belden as seen from Gilman. On the left are the loading tippel, steam room and dryer. Loading tippel is extended over the railroad cars to be filled with ore. A surface tram carrying ore ready for loading is visible behind the loading tippel.
Cover Image
Format:
Image
Supply warehouse at Belden. Supplies came by rail through the Eagle River canyon and went into this warehouse. Robert E. Riggle worked here.
Cover Image
Format:
Image
Path of the mud flow from the 1919 landslide at Belden. The cribbing at the top left of the photo is broken and the mud flows around some buildings, over additional cribbing, over the railroad tracks, and into the Eagle River at the bottom. The flow parallels the path of the tram to Gilman, which was not damaged.
Cover Image
Format:
Image
Close up looking down the tram at Belden toward Gilman. Train at opposite side of the Eagle River at the bottom.